Customization: | Available |
---|---|
Type: | Wireless |
Network Site: | Border Router |
Still deciding? Get samples of US$ 140/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
AR7000 ROUTER is a kind of terminal device that developed based on 2G/3G/4G/5G, WIFI, VPN technology.It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, postal services,industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
Items | Contents |
Industrial Design | High-powered industrial cellular module |
High-powered industrial 32bits CPU | |
Housing: iron, providing IP30 protection. | |
Power range: DC 5~35V | |
High Reliability |
Support hardware and software WDT |
Support auto recovery mechanism to make router always online | |
Ethernet port: 1.5KV magnetic isolation protection | |
RS232/RS485 port: 15KV ESD protection | |
SIM/UIM port: 15KV ESD protection | |
Power port: reverse-voltage and over voltage protection | |
Antenna port: lightning protection(optional) | |
Standard and Convenience | Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly |
Support standard WAN port and PPPOE protocol that can connect to ADSL directly | |
Support intellectual mode, enter into communication state automatically when powered | |
Support several work modes | |
Convenient configuration and maintenance interface(WEB or CLI) | |
High-performance and Security | Support multiple WAN access methods, including static IP, DHCP, PPPOE, 2.5G/3G/4G. |
Support double link backup between 2.5G/3G/4G and WAN (optional). | |
Support VPN client(PPTP, L2TP, IPSEC and GRE)(only for VPN version). | |
Support remote management, SYSLOG, SNMP, TELNET, SSH, HTTPS, etc. | |
Support local and remote firmware upgrade,import and export configure file. | |
Support NTP, RTC embedded. | |
Support multiple DDNS provider service. | |
Support MAC address cloning. | |
WIFI support 802.11b/g/n. support AP, client. | |
WIFI support WEP,WPA,WPA2 encryption. | |
Support multiple online trigger ways, including SMS, ring and data. Support link disconnection when timeout. | |
Support APN/VPDN. | |
Support multiple DHCP server and DHCP client, DHCP binding MAC address, DDNS, Firewall, NAT, DMZ host, QoS, traffic statistics, real-time display data transfer rate etc. | |
Support TCP/IP, UDP, FTP(optional), HTTP, etc. | |
Supports SPI firewall, VPN pass-through, access control, URL filtering,etc. | |
Support local log storage. | |
Support GPS (optional). | |
Support two SIM/UIM card (optional). |
Items | Contents | |
Hardware System | CPU | Industrial 32bits CPU |
FLASH | 16MB (Extendable to 64MB) | |
SDRAM | 128MB | |
Interface | WAN | 1 10/100Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
LAN | 4 10/100Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection | |
Serial | 1 RS232(or RS485/RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5(optional), 2 Parity: none, even, odd, space(optional), mark(optional) Baud rate: 2400~115200 bps |
|
Antenna | Cellular: Standard SMA female interface, 50 ohm WIFI: Standard SMA male interface, 50 ohm GPS(optional):Standard SMA female interface, 50 ohm |
|
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection | |
Power | Standard 3-PIN power jack, reverse-voltage and over voltage protection | |
Reset | Press this key for 8 seconds to restore the router to its original factory default settings | |
Indicator | "Signal strength","PWR","RUN","SIM","Online","LAN1","LAN2","LAN3" ,"LAN4","WAN","WIFI","GPS"(optional),"SIM2"(optional) | |
Router front interface diagram: Router rear interface diagram: |
||
Network | Wireless Network | GSM/GPRS/EDGE: 850/900/1800/1900MHz CDMA: 800/1900MHz WCDMA/HSUPA/HSPA+: 850/900/1900/2100MHz CDMA2000 1x/ EVDO Rev. A: 800/1900MHz TD-SCDMA: 1880-1920/2010-2025MHz(A/F) TDD-LTE: Band 38/39/40/41& Band 61/62 (Private Network) FDD-LTE: Band 1/2/3/4/5/7/8/13/17/20/25 5G Sub-6: n2/n5/n7/n12/n14/n38/n41/n66/n71/n78 5G UL MIMO: n77/78/79/41 |
WAN | Support PPP/PPPOE | |
LAN | Support APR | |
Network Authentication | Support CHAP/PAP Authentication | |
Network Access | Support APN/VPDN | |
IP Applications | Support Ping,Trace,DHCPServer ,DHCP Relay, DHCP Client,DNS relay,DDNS ,Telnet | |
IP Routing | Support static routing | |
GPS (optional) |
Receiver Type | 50-channle GPS L1(1575.42MHz)C/A code SBAS: WAAS,EGNOS,MSAS,GAGAN |
Max. update rate | 5 Hz | |
Accuracy | Position: 2.5m CPE SBAS: 2.0m CPE |
|
Acquisition | Cold starts: 32S Warm starts: 32S Aided starts: <1S Hot starts: <3S |
|
Sensitivity | Tracking: -160dBm Reacquisition: -160dBm Cold starts: -146dBm |
|
Timing accuracy | RMS: 30ns 99%: <60ns Granularity: 21ns |
|
Time pulse | Configurable, 0.25 to 1000Hz | |
WIFI | Standard | IEEE802.11b/g/n |
Bandwidth | IEEE802.11b/g: 54Mbps (max) IEEE802.11n: 150Mbps (max) |
|
Security | WEP, WPA, WPA2, etc. WPS (optional) | |
Power supply | Standard Power | DC 12V/1.5A |
Power range | DC 5~35V | |
Consumption | <450mA (@12VDC) | |
Physical | Dimensions | 186.8x120.2x28mm |
Weight | 580g | |
Environmental Limits |
Operating Temperature | -35~+75ºC (-31~+167ºF) |
Storage Temperature | -40~+85ºC (-40~+185ºF) | |
Operating Humidity | 95% ( unfreezing) |